Home > Door Protection > Door Protection Panels and Door Kick Plates

  • door_panels_and_plates
  • door_panels_and_plates_2
  • sdp1553-75
  • door_panels_and_plates_3
  • sdp2067-0048
  • door_panels_and_plates
  • door_panels_and_plates_2
  • sdp1553-75
  • door_panels_and_plates_3
  • sdp2067-0048

Door Protection Panels and Door Kick Plates

  • Fire rated - Please see further details below
  • Can be fitted to fire doors without affecting integrity
  • Install to new doors or retrofit
  • Extends lifecycles of doors; reducing replacement & maintenance costs
  • Available in full sheets or cut to size
  • Fixed with tape or adhesive - you can watch the fixing video below
  • Choice of colours
  • Use with door edge protectors, glazing bead & frame protectors to provide a complete impact protection system
  • Discounts available on certain colours and material off cuts – contact us

2500 x 1250 mm standard panel size (cut to requirements)

2.0 mm thick

FalmouthEx & HessianEx (limited colours available in HessianEx, please contact us for inquiries).

Smooth – Satin Pastel

Smooth – Gloss

Extruded PVCu

FalmouthEx

HessianEX

Smooth

Keep your doors free from marks and scuffing with Yeoman Shield door protection plates.

Door protection panels, kick plates and finger plates work perfectly in tandem with the Yeoman Shield Door Edge Protectors. Together, they ensure the entirety of your door is protected from damage.

They protect the vulnerable face of the door and can be installed at either full or half height. Smaller plates can be used to protect just those areas which have a lot of wear and tear such as the middle of the door (push plate) or the bottom of the door (kick plate area).

Yeoman Shield’s 2.0 mm door protection plates have surfaces specifically designed to conceal scratches, scuffs and markings. They are fitted to the face of doors to help keep them in good repair and looking great.

Plates can be shaped to a specific design or can be inlaid with an imagery design or signage. This can be just for added design interest, or to provide useful information such as door numbers or WC signage.

Our door protection panels are fire rated, having been tested to the required current standards. Fire door protection does not affect the integrity of the fire door when installed and can keep fire doors undamaged, reducing expensive maintenance work and keeping buildings safe in the event of a fire.

Cutting door protection plates to size often leaves us with stock residue material. It may be possible to meet your requirements for Push/Mid/Kick and D Plates from such residue, at a reduced cost.


Yeoman Shield Fire Test Information

Textured Extruded Sheet – B, s3, d0

BS EN 13823: 2010 + A1: 2014.

BS EN ISO 11925 – 2: 2010.

BS EN 13501 – 1: 2007  + A1: 2009.

BS 476: Part 7: 1997 – The surface spread of flame products – Class 1Y (Class 1 is the best classification in this test).

BS 476: Part 6: 1989 + A1: 2009 – Fire propagation for products – Class O – As defined in the latest building regulations, approved document B (Fire Safety).

Installation Guide

Download your Installation Guide for this product below:

Request a sample